Air conditioner gives a sooth feeling in the scorching summer of the country. You can calmly sleep in cold of the air conditioner. You may feel as you are in a hill station in the summer season. The outside temperature is burning everything but you feel cool in the ac room. Most of us use only some functions of the air conditioner; many functions are not used because of less knowledge. With much advancement in air conditioner technology, you may be confused by all the hard names and symbols on your ac remote. You need to be aware of different mode given on ac remote control.
Let us talk about the functions of the modes on the ac remote. These modes are very helpful to face different climate and seasons during summer. Let’s see how they are useful in various weather conditions.
Auto mode is the mode where air conditioner works automatically; it means air conditioner automatically set temperature and fan speed. You can change temperature and fan speed in this mode. Air conditioner set temperature and fan speed as required in the room. AC automatically sets the compressor and fan speed as suitable for the current room temperature. Once reach on required temperature, the compressor is off and fan speed is also adjusted automatically. Overall, air conditioner automatically adjust all required things depend upon room conditions.
Cool mode will cool your room. The control is in your hand now. You can adjust the temperature and the fan speed to feel in hot weather. The outer temperature is very high then this mode takes some time to make your room chilled.
Dry Mode in ac remote is mostly to remove the moisture from the room. This mode works like a dehumidifier. This mode is mostly used in the rainy season when moisture and humidity level is high inside. It refreshes the inner environment of room. In this mode, compressor is on/off to expel the humidity out and fan runs on low speed continuously.
This mode is a silent mode. In this mode the unit works quietly as it may possible. In this mode, the fan speed becomes little slow.
This is energy saving mode in the ac unit. But you can’t enjoy cool in this mode because compressor is off. The normal fan of the air conditioner works in this mode. Fan mode does not give you chilly and cool air to feel good. Fan mode helps to ventilate your room and it helps to refresh air in the room.
This mode is available in the most of air conditioners but works in some units. The function of the heat mode is to warm the room with hot air. This works by reversing the airflow in the ac unit. The ac unit throws the hot air inside the room instead to send it outside. The ac unit throws cold air outside the environment. Hot air is provided by the compressor. This mode is very useful in the winter season. Fan may take 3 to 5 minutes in starting to stop to spreading cold air in the room.
Turbo Mode is called Jet mode/Fast mode/ high power mode. This mode helps to achieve cold of set temperature in short time. As it works very fast to get the desired temperature, maximum energy is used in this mode. The compressor and fan work at full speed. This consumes lot of electricity. It is wise to use this mode for short span otherwise it leads to high cost of electricity bills. You can use this mode if you want to cool your room instantly and there is scorching heat outside.